Derailleur Cordz Set 1.5mm
[DPC-FDS15]
Product Details
New "In-Line" fiber arrangement and improved nylon coating reduce friction to enhance shift accuracy and durability.
The 1.5mm Derailleur Cordz Set will drop right into your existing shift system (Shimano, SRAM, Campy compatible) with little to no modification (some shifters will require slight modification). We recommend the 1.5mm Cordz Set if you currently run 5mm housing, Nokon Beads, or I-Links. If your housing is worn then we recommend upgrading to one of our complete Derailleur Systems (1.2mm or 1.5mm) which provide fresh pre-lubed, Kevlar reinforced housing and sealed, alloy ferrules to update your cable system properly.
Product Specifications
Specifications:
Weight: 2g/m - A 2m cord weighs less than 4g(a steel cable is 12-15g)!
Diameter/Length: 1.52mm x 2m (note: when installing your new Cordz, start with the rear derailleur first. That way, if a problem occurs with that cord then you can simply cut it and use it on the front derailleur).
Package Includes:
2 ea - 1.5mm Derailleur Cordz
1 ea - Sticker & instruction sheet
Compatibility
1.5mm Derailleur Cordz™ are compatible with all major shift systems but may require slight modification at the cable inlet hole of the shifter. 1.5mm Derailleur Cordz™ are compatible with: ‘07 Shimano XTR MTB shifters without modification, with SRAM X0 grips and trigger MTB shifters without modification and with pre-‘07 Shimano XTR MTB shifters with slight modification to the right shifter (by enlarging the cable inlet hole with a 1/16 drill bit). 1.5mm Derailleur Cordz™ are compatible with traditional and aftermarket 5mm derailleur housing, including Power Cordz 5mm housing, and with Nokon housing when used with the Power Cordz Nokon compatible liner.
Ask a Question about this Product
Reviews
There are currently no reviews for this product
